The Trident BOSS+ Fishing Drone is a large and powerful drone that allows you to fish the way you want. It can either pull 25 hooks out to 1000 metres (or more) or a large 4.5 kg bait over a shorter distance. The Trident Drone can handle strong winds (20 kt’s) and bad weather. The Trident BOSS+ is waterproof (IP67) from rain and the coastal salty environment.
The CutaCopter Trident BOSS+ Fishing Drone is now available in New Zealand.
Contact us on 07 543 0266 to order your Trident Boss drone today. Order now for Christmas.
TRIDENT BOSS+ DRONE
The Trident BOSS+ has the pilot and people’s safety at the centre of the design. The drone hardware, like the frame, bait release, flotation etc, is only one part of the equation. How the drone flies and reacts to the pilot’s instructions is an essential part of the design of a successful drone.
The Trident Drone is a development of the EX-2, which was developed from the REVO4 and Matrix drones. The Trident is designed from the ground up as a fishing drone. Each new model from Cuta Copter is built on the knowledge and experiences gained from users from around the globe, and the aim is to build the best fishing drone possible.
The Trident BOSS+ is an extremely powerful fishing drone and can lift large baits or payloads. The Trident will happily pull 25 hooks out to 1000 metres or carry a large single bait up to 4.5 kg over a shorter distance. Most people are finding 13 hooks (one side of the traceboard is a good working number, and this allows a larger weight to be used. The Trident has a special flight mode to soften the responses that reduce the pendulum effect.
The number of sets you can do depends on the weight and drag of your payload, the distance of the set and the wind conditions. If you are dropping your baits at 400 metres if the payload/drag is 1kg, you should get up to seven sets; 2 kg drops the number to five and 4.5 kg loads will drop the sets to three.
The Trident BOSS+ is easy to fly, and the Skydriod App gives verbal and visual messages and warnings of any significant events. This means the pilot is always informed.
The release line is permanently attached to the left bottom side of the drone, and the release is on the right-hand side of the drone.
There is a loop at the end of the release line that loops over the forward arm of the release horn. Ensure the line stays forward of the release horn so it doesn’t tangle on release. It is simple, yet extremely reliable.
The Trident has 15-inch carbon propellers which attach to the motors with a simple screw-on attachment. The motors are counter-rotating. The propellers screw on in the opposite direction to the rotation of the motor. The front left will screw on counter-clockwise, and the front right screws on clockwise. The propellers will self-tighten as the motors are running. The motor hubs are colour-coordinated to match the correct propeller to the correct motor.
The Trident is supplied with two high-performance 5000mAh (5AH) Lithium Polymer batteries. These high-performance LiPo batteries provide the power needed to pull your baits out to sea. The batteries are fitted with the T-90 connector.
The Trident comes with a smart charger for the LiPo Batteries. This charger enables the LiPo batteries to be charged in a balanced mode, as well as able to put the batteries into storage mode.
This charger will enable you to correctly maintain your batteries to ensure you maximise their operational life.
The charger can charge different types of batteries, and it operates on both AC (mains) and DC (12v battery) power. This means you can charge your batteries at the beach if you have a suitable power supply.
The SkyDroid Transmitter is the handheld controller of the drone. The joysticks are spring-loaded and self-centring. When flying, this means the Trident will always return to a stationary hover if you release the sticks. It also means you are not having to manage the throttle or yaw to maintain an altitude and direction. You can concentrate on flying the Trident where you want it to go. The short switch levers and flush-mounted buttons significantly reduce the chances of them being damaged or broken.
The Transmitter also works with the SkyDroid App, which can be loaded onto your phone.
SKYDROID TOWER APP ONTO AN ANDROID DEVICE
The SkyDroid Tower App can be downloaded and installed onto an Android device, such as a Samsung phone. Unfortunately, Apple phones do not recognise the Bluetooth chip in the Skydroid Transmitter. We have found the small Samsung phones work well and can be connected via Hotspotting to your Apple phone to gain Internet access.
The big advantage of using the Skydroid Tower App is the additional information that is displayed on the screen, including
Distance from home
and a Snail Trail of the flight.
It is also possible to create flight missions and activate and fly the mission from the device.
The App can be downloaded from the Seahorse website, including from the bottom of this page.
The App can also show the video feed from the onboard camera if you use the supplied USB cable. Otherwise, you can use the Bluetooth connection to connect the App to the transmitter, and this will enable the flight telemetry to be displayed on the screen.
In the App, click on Connect, situated in the bottom left-hand corner
Select the transmitter (for example R4100-Trident) to connect, and once the drone is powered (battery connected and quick switch in), the telemetry data will be transmitted to the screen.
There are two main screens we will use. Flight Data and Editor. The other screens are linked to set-up and aren’t needed for day-to-day use.
The Android device doesn’t need cellphone coverage. All it needs is Bluetooth to connect to the transmitter and sufficient power to run the live video feed if you wish to use that feature. We have found a 4 to 6-inch screen is the best for both seeing the information and not being so big it gets in the way.
The Skydroid App allows “missions” or fully automated flights. This involves setting one or multiple waypoints on the screen and any actions required, such as dropping the bait. Once activated, the Trident drone will take off, fly out to the waypoint, drop the bait and then return to launch and land all by itself.
The Trident has the best waterproofing of any Cuta-Copter, plus it has built-in floatation. The Pixhawk flight controller and electronics are housed in a special low-profile sealed (IP67) compartment, and this allows the GPS receiver to be placed in the nose of the Drone where it can get the best signal. There are additional closed-cell (floatation) foam inserts in the main body and motor arms. This provides waterproofing from rain, washing by hand and floating on the surface of the water. It does not provide protection if the drone crashes into the sea, and the force of the impact will force water past the seal. Long-term exposure to salt water will cause extensive damage to the motor and wiring of the drone. The Trident BOSS+ is not designed to be landed in the water. The waterproofness is to provide a high level of protection from the marine environment.
. Please note, that the drone would need a full wash in a salt-removing (Salt Away) product if it did go into salt water.
Set-up for Launching
With the speed of the drone, you need to have everything set up before you take off. Some people stretch the line-up and down the beach, but the seagulls will attack your baits and get everything tangled. It is best to lay the traces out side by side with the polyester line looping away from the traces. With liftoff, the traces will then be lifted up into the air by the drone, not dragged across the beach from where they were laying to where the drone is.
As the bait starts lifting into the sky, you can start flying the drone forward (and up), but care is needed to ensure the line comes off the winch in a consistent manner.
Whats in the Box
WHAT IS IN THE BOX
1 * Carry bag backpack
1 * Trident BOSS+ Drone
1 * SkyDroid Transmitter
2 * 18650 Lithium-Ion Batteries – Installed into the transmitter
1 * Smart LiPo Battery Charger
1 * Battery tester
1 * Landing Pad
2 * 5000mAh 6S high-performance LiPo batteries
4 * Carbon Propellers
3* 6oz weights
1 * Manual and logbook
The 6-month warranty is extended to 12 months if registered with Seahorse
Flight Controller –
Pixhawk® BOSS+ brings you the ultimate in performance, stability and reliability in all aspects.
Arm® Cortex®-M7 processor (STM32H753) with Floating Point Unit (FPU), 480MHz high-speed operations and 2MB flash. Developers can be more productive and efficient, allowing for more complex algorithms and models.
High-performance onboard, low-noise IMU and automotive-grade magnetic compass based on FMUv6X open standard. It aims to achieve better stability and anti-interference ability.
Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability.
An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.
External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI interface.
Integrated Microchip Ethernet PHY for high-speed communication over Ethernet with onboard devices such as mission computers.
Newly designed vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings.
IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
The Pixhawk® BOSS+ is ideal for corporate research labs, academic research and commercial applications.
Processors & Sensors
Operating System – the Pixhawk flight controllers use the Arducopter Open Source autopilot system. ArduPilot is a trusted, versatile, and open-source autopilot system supporting many vehicle types: multi-copters, traditional helicopters, fixed-wing aircraft, boats, submarines, rovers and more. The source code is developed by a large community of professionals and enthusiasts. it is one of the most advanced autopilot systems available.
Body Design – The body design of the Trident BOSS+ has been developed to reduce aero drag. This ensures longer flight time as the motors do not need to work as hard to pull the Trident through the air. The overall footprint is slightly smaller than the previous Cuta Copter drones, but the motors are more powerful and efficient, allowing more sets from the batteries.
Camera – The Trident BOSS+ is fitted with a tilting camera. The camera tilts from looking forward to looking straight down. Looking forward is great as you fly out to the point of interest, and looking directly down gives you a chance to check out any new fishing spots. The video is displayed on the SkyDroid Tower App.
SkyDroid T10 Transmitter – This high-quality transmitter is fitted with sand covers over the gimbals to improve overall weather resistance. Flush-mounted buttons and low-profile toggle switches have been used to prevent damage. The 2 x 18650 lithium batteries provide greater than 20 hours of radio time on a full charge. The T10 Transmitter also accepts telemetry data and live video feed from the Trident, which it passes onto the SkyDroid Tower App on an Android device.
SkyDroid Tower App control – The Android App displays a range of flight telemetry data, including battery voltage, distance from home and altitude. It also allows the user to plan and fly missions, plus the App can control and change various functions, such as arming, disarming and selecting the flight mode.
The Tower App also gives access to the parameters of the flight controller. This is for advanced users only.
Water Proofing – The main electronics are housed in a separate compartment which gives low-level waterproofing against rain, hand washing and short-term floating on the surface. It will not protect the electronics in a crash into the ocean or from damage due to long-term exposure to saltwater.
Double flotation – The 3 air chambers provide the first level of flotation protection. The Trident is also filled with laser-cut foam buoyancy, providing a second level of flotation protection. The landing feet also provide additional floats.
Quick Switch – The installed quick switch limits the need to open the battery bay between bait drops; the craft is quickly switched on and off using the supplied quick switch.
Backpack – The Trident Cuta Copter comes with a backpack carry case that will carry the Trident, the landing pad, batteries and props. It can also carry the charger and Android device.
Real-time Video Stream – The Trident is equipped with an HD 720p digital reef spotting camera, which has a real-time video transmission of up to 1000 metres. Camera settings like brightness, contrast and saturation can all be adjusted via the APP. Recordings of the Video feed can only be done in Skydroid FPV (another App) and is not available in SkyDroid Tower.
SkyDroid FPV – This App can record the live video feed to a suitable Android device. The Android device needs to be connected to the transmitter by the supplied USB cable, and it can run in the background and record while you are flying.
Robust Design – Cuta Copter has always prided itself on building the toughest drones on the market, and the new Trident takes it a step further with even greater survivability.
GPS – The New advanced PIXHAWK 4 GPS enables concurrent reception of up to 3 Global Navigation Satellite Systems ‘GNSS’ not just two such as GPS and GLONASS; it deals with GPS, Galileo, GLONASS and BeiDouh. The GPS has as also been located at the highest point of the craft for the best satellite reception and maximum separation from other electronic parts in the craft to improve reliability and precise landings.
Landing in water – the Trident can land and take off from water. Rough water will impact the ability of the craft to take off, as waves will interfere with the prop lift. Following saltwater exposure, extreme cleaning is required with a product like Salt-Away. Metal parts in the motors will corrode and reduce the drone’s life if not treated properly. Intentional landing on water is not recommended for everyday use. The battery compartment is not waterproof, and this could lead to the battery failing.
Follow-Me mode – In this mode, the drone will follow the location of the transmitter or phone.
Boat Landing or Return to Me mode – this feature allows the drone to land (RTL) at the location of the pilot and not at the take-off point. This function is useful when using the drone on a boat which has drifted away from the original take-off coordinates, or if you want the drone to land away from its launch area (away from the fishing rods). This is called ‘Return to Me’ in the Skydroid Tower app.
Click to Save Waypoint Setting – It is possible to set a waypoint using the transmitter to ensure the next set returns to the same spot. Once the waypoint is set, the flight controller automates and controls the next flight. This is useful if you are dropping burley in a particular spot or want to target the same location.
Missions – The SkyDroid App allows you to create and fly missions. This can fully automate the flight so the Trident does not require any input from the transmitter. A mission could include taking off, flying to a selected waypoint, dropping the baits, returning home, and landing.
MULTIPLE SAFETY FEATURES
APP display and voice. Visual and voice messages are broadcast to keep the pilot informed about all aspects of the flight. The system will warn you by voice and display that the battery is low, height, voltage or when Magnetic interference is detected. – a set of earplug headphones could be useful to hear the messages.
Thrust Loss Detection will automatically release the bait and RTL.
Low Battery Failsafe– The Low voltage failsafe level is set at 22 volts. On reaching this, the bait/line will be released automatically, and the Trident will automatically Return to Launch (RTL).
Loss of signal Failsafe – If the Trident loses connection with the transmitter, the bait/line will be released automatically, and the Trident will Return to Launch (RTL).
World Magnetic Database – This means the compass calibration is only required to be done once – We will do this at the Seahorse Factory.
Launch Prevention mode – The Trident will not ARM or start the motors unless everything is working correctly. This includes having sufficient GPS Satellite connections and sufficient voltage in the battery.
Anti-Pendulum feature – The POS mode has a softer and slower de-acceleration to assist in limiting the degree to which a pendulum motion can occur with the bait. This allows for shorter leaders to be used with safety.
RTL speed – Return to Launch ‘RTL’ speed has been increased to get the drone off the water as soon as possible.
Landing Detection – The new landing detection feature DURING AUTO-LAND will shut off the motors as soon as the drone detects a landing. Motors will also be shut off if it detects a crash. For RTL landings, the Trident will begin its descent quite fast, slowing down for the last 5 metres. For manual landing, it is required to hold the left stick down. Do not move the right stick once the drone is on the ground.
Distance and Altitude Geo-fence – Although the Trident can operate up to 1.5kms- the Geofence settings are set at the factory to 1200 metres distance and 120 metres altitude. This geofence parameter allows enough battery time for the drone to return safely when the low battery self-protect function is enabled.
Magnetic interference monitoring – Auto adjustment and verbal warnings.
BlackBox recording – The BlackBox will record the flight telemetry, which can be accessed by Seahorse to assess flight performance and identify any issues.
Warranty and very important info
The user accepts all liability and responsibility for the safe operation of the Drone. The user understands that Seahorse cannot be held responsible for any damage resulting from an accident as well as any consequential damage.
The user undertakes to only operate the Drone when they are competent in the operation of the craft.
The user must understand the operation of the drone and the meanings of the various LED lights and messages.
The user must be aware and knowledgeable of any local flight regulations that could affect the operation of the Drone.
The user should arrange appropriate insurance if required.
Only Seahorse is authorised to service and repair Trident 5K Cuta Copter KontikiDrones in New Zealand.
You agree that by operating the Drone, you are aware of the risks and have the know-how to operate the drone safely.
It is the pilot’s responsibility to ensure the drone is in good working order prior to liftoff. Once the drone is flying, it is the pilot’s responsibility to ensure the drone is flown safely. Any damage caused to the drone while flying is the responsibility of the pilot and is not covered under warranty.
Register your drone with Seahorse to extend your warranty to twelve months.
Seahorse Equipment Limited maintains a 6-month return-to-base warranty for CutaCopter Drone products from purchase. This will be extended to 12 months on registration of the owner’s details with Seahorse.
The warranty covers the repair or replacement of faulty parts due to faulty workmanship or materials.
The warranty does not cover normal wear and tear from use. It does not cover damage caused by misuse, misadventure or water damage. The warranty does not cover the loss of a Drone, line or accessories. It does not cover damage caused by misuse or saltwater damage. The warranty does not cover damage that occurs while the drone is flying. It is the pilot’s responsibility to perform a pre-flight check to ensure the drone is airworthy.
Seahorse retains the right to determine whether to repair or replace the faulty part. Where it is possible, Seahorse will review the flight logs to identify the reason for the failure.
The item(s) in question needs to be returned to the Seahorse factory at the owner’s cost. Seahorse will then assess the item(s) to determine whether or not there is a fault and remedy if required.
Please note the warranty will become invalid if user modifications are made to the Drones, or non-original CutaCopter or Seahorse parts (for example, batteries) are used in or with the Drones.
The warranty does not cover damage caused by accident, misuse, unauthorised repairs, or not taking reasonable care. Seahorse maintains the right to determine whether to repair or replace any parts subject to a warranty claim.
Drones are generally covered under Household contents insurance, but different companies have different limits on what they will pay.
Seahorse recommends you register your Drone with your insurance company and get it specified on the policy. – The serial number for the Drone is displayed in your Transmitter.
Talk to your insurance company about any special requirements to have the drone covered while you are using it. Generally, you will need to be flying within Civil Aviation Authority rules to be covered.
SERVICING AND REPAIRS
It is a well-known fact for drones that gravity works harder over water. If something goes wrong, it could be a wet landing. It is important that your Drone is operating correctly and everything is in excellent working order.
Seahorse will be offering an annual service that will cover a complete service and performance check of the Drone. Our fully trained staff will also be able to perform any repairs, servicing or testing required.
The service will include
Testing all the batteries
Performance of the motors
Performance of the electronics
Checking the condition of the Kontiki and its components.
Ensuring everything is working as it should, including a test flight.
Seahorse is offering a complimentary service and check-up after your first six months of flying.
CUTA COPTER – DRONE MANUFACTURER
The Trident Kontiki Drone is manufactured in South Africa by Cuta-Copters. Seahorse and Cuta-Copters have customised their Trident to meet the unique requirements of New Zealand Kontiki Fishing.
Cuta-Copter has been a leading manufacturer of fishing drones since 2014 and has continued to develop and innovate its product making it what it is today. We believe Cuta-Copter makes one of the best-performing and affordable fishing drones anywhere. That is why we are offering them under the Seahorse brand.